Internal overlay app for camera control
Our camera control add-on application brings you many new features. Full camera control for almost any camera brand at current camera market via on-screen UI. MavCam will also provide control and overview above geotagging features. Last but not least, if you have Gremsy or SimpleBGC gimbal, MavCam will provide tuning tool for easy and in-flight stiffnes / power tuning. MavCam is overlay app so can work with any control app - QGC / Solex / MissionPlanner because is simply drawn in front of them.
AERIAL PHOTOGRAPHY
Pixhawk + Herelink driven drones are now amazing new option for aerial photography. Our camera control tool is more advanced than any other current drone system on the market.
MAPPING MISSIONS
For mapping users, instead of camera control you can get direct EXIF geotagging. Geotagging feature will simplify your workflow, avoid problems in post production and increase accuracy of your models.
Select your favourite remote controller
Our camera control application was originally designed and developed for the HereLink, but it is also compatible with other Android-powered remote controllers such as SIYI, Skydroid, and others. No matter which drone control application you prefer, whether it's QGC, Solex, MissionPlanner, or any other, our application will overlay and appear only when you need to handle camera configuration.
SIMPLE WIRING
One MavLink only is necessary
for all features of the camera control and geotagging.
for all features of the camera control and geotagging.
FLEXIBLE
Entire has three flexible IO ports
and can be installed in any possible usage scenario.
and can be installed in any possible usage scenario.
EXTERNAL GPS
Instead of MavLink GPS stream
you can use EMLID ERB or any other NMEA device for geotagging
you can use EMLID ERB or any other NMEA device for geotagging
AIR COMMANDER
This little unit is AIR Commander ENTIRE, most advanced camera control device. It is fully universal device with many usage scenarios. You are not limited to the HereLink / PixHawk ecosystem, Entire runs also at DJI ecosystems with full camera control and also Geotagging.
CAMERA POWER
Entire provides power to the camera via USB (for cameras with support for USB charging).
AUTOMATED TRIGGERING
If you don't like to use automated flight with automatically generated triggers by the PixHawk, you can easily use Entire's automatic triggering based on flown distance or time.
POWERFUL & FLEXIBLE
The Entire is very powerful piece of hardware and is able to handle almost any imaginable task. We are very flexible in firmware updates as per customers needs and applications.
GEOTAGGING
Entire can save all GPS coordinates and camera angles readed from the gimbal (Gremsy) to the EXIF of each triggered photo.
TRIGGER PHOTO / VIDEO
Basic camera control, trigger photograph or start / stop video recording.
EXPOSURE CONTROL
Full exposure control for any camera connected. MENU access and navigation is available for Sony, PhaseOne, RED cameras.
ENTIRE CONFIGURATION
Status of connections, Camera connection status, WiFi connection status and also configuration of basic features.
GEOTAGGING
Entire can geotag your photos in the camera by GPS and also camera angles. GPS can be obtained via MavLink, or from external device like EMLID or any other NMEA device. Camera angles are available for Gremsy users.
GREMSY TUNING TOOL
For Gremsy users we have implemented Stiffness / Power / Gain tuning tool for in-flight tuning. Save time of long experimenting, this tool helps you to tune the gimbal during real flight.
Control with C & D buttons
Camera control can be also done via new "CD Tool" of MavCam. Long press of D button opens menu to select feature, short press of C or D button than execute function up or down.
External Andorid application
with own camera control UI & liveview.
For dual operator situations we do offer also external MavCam application with own liveviw and own camera control UI.
DUAL OPERATOR
Our external MavCam application can run on external phone/tablet at the place where second operator control the camera movements.
CONNECTION
External MavCam application is connected to the MavLink via 5GHz hotspot of the HereLink unit.
MissionPlanner plugin
for full camera and geotagging control.
This plugin is alternative to HereLink internal control UI. Plugin works independently and you can use it without HereLink or MavCam running outside. UI gives you full exposure control and also GeoTagging overview.
WHAT'S THE PRICE?All necessary equipment is available at our store
ENTIRE R3
Plain Entire for basic implementation of camera control and geotagging features via MavCam
USD279
GREMSY GEOTAGGING SET
This set of cables is aimed to setups with Gremsy gimbals. This product allows the Entire to read accurate angles of the camera and also pass all wirings through Gremsy AUX port.
USD89
SIMPLE GEOTAGGING SET
Cables necessary for PixHawk Cube or DJI flight controller connection and hotshoe connector with cable.
USD29
Europe based and drone industry passionate. All our gear is made primary for us.
CATEGORIES
INFORMATION
SUBSCRIBE NOW
Subscribe to our newsletter. Not frequent, only important information about our products, updates or new features.
© airpixel.cz 2021