BlueTooth camera control

Table of Contents
Configure BT extension #

The Entire has no internal Bluetooth capability. BT camera control is done via third-party external USB Bluetooth dongle. Compatible USB cable and Bluetooth dongle is available at our shop. Configuration and first camera connection is also available at our YouTube channel. Check the video here.

Configuring the Entire for Bluetooth camera control:

1.    Connect to the Entire Wi-Fi hotspot and setup page.
2.    Disconnect any cable from PORTMULTI, if inserted.
3.    Open the MENU and select Control Mode -> BlueTooth
4.    Top right bar at overview page will switch to BlueTooth with “no dongle” status
5.    Connect BlueTooth USB extension cable with BlueTooth dongle.
6.    Status LED should now start flashing BLUE as sign of initialization of BT dongle
7.    In few seconds flashing stops and status bar will turn to “ready”

8.    Scanning, adding or removing of BT cameras, is available under MENU->BT connection

Pairing new camera #

1.    Connect to the Entire Wi-Fi hotspot and setup page.
2.    Open MENU and select BT connection
3.    New window shows list of paired devices, you can pair more than one camera.
4.    Make sure, you have enabled Bluetooth in the menu of the camera
5.    Click to first empty line, and click to “New Scan” button
6.    Once scan will be done, available devices will be shown in the list above the button
7.    Select your camera from the list and click to “Connect”
8.    In few seconds, you will be requested for the PIN. Open the camera MENU and navigate to Bluetooth configuration. Copy the PIN code from the Camera to the Entire and confirm.
9.    Once pairing is successfully done:
     a.    Your camera must will be shown in the list of paired devices
     b.    Camera must show the Entire’s address as “Connected”
c.    If a) or b) is not as described, please restart the Entire and repeat the process.
10.    Once camera is successfully paired, the Entire will connect automatically once available. (if user is present in at configuration page, automatic searching is disabled)

What are your Feelings
Configure BT extension

The Entire has no internal Bluetooth capability. BT camera control is done via third-party external USB Bluetooth dongle. Compatible USB cable and Bluetooth dongle is available at our shop. Configuration and first camera connection is also available at our YouTube channel. Check the video here.

Configuring the Entire for Bluetooth camera control:

1.    Connect to the Entire Wi-Fi hotspot and setup page.
2.    Disconnect any cable from PORTMULTI, if inserted.
3.    Open the MENU and select Control Mode -> BlueTooth
4.    Top right bar at overview page will switch to BlueTooth with “no dongle” status
5.    Connect BlueTooth USB extension cable with BlueTooth dongle.
6.    Status LED should now start flashing BLUE as sign of initialization of BT dongle
7.    In few seconds flashing stops and status bar will turn to “ready”

8.    Scanning, adding or removing of BT cameras, is available under MENU->BT connection

Pairing new camera

1.    Connect to the Entire Wi-Fi hotspot and setup page.
2.    Open MENU and select BT connection
3.    New window shows list of paired devices, you can pair more than one camera.
4.    Make sure, you have enabled Bluetooth in the menu of the camera
5.    Click to first empty line, and click to “New Scan” button
6.    Once scan will be done, available devices will be shown in the list above the button
7.    Select your camera from the list and click to “Connect”
8.    In few seconds, you will be requested for the PIN. Open the camera MENU and navigate to Bluetooth configuration. Copy the PIN code from the Camera to the Entire and confirm.
9.    Once pairing is successfully done:
     a.    Your camera must will be shown in the list of paired devices
     b.    Camera must show the Entire’s address as “Connected”
c.    If a) or b) is not as described, please restart the Entire and repeat the process.
10.    Once camera is successfully paired, the Entire will connect automatically once available. (if user is present in at configuration page, automatic searching is disabled)