Table of Contents
Voltage polarity!
uBEC does not have reverse polarity protection!
Triple check polarity of input voltage!
If you are unsure, disconnect Entire before first power up!
Triple check polarity of input voltage!
If you are unsure, disconnect Entire before first power up!
Warning​!
MAXIMUM INPUT VOLTAGE IS 23V!
MAXIMUM CONSTANT OUTPUT CURRENT IS 1A!
INPUT A AND B ARE INTERCONNECTED!
MAXIMUM CONSTANT OUTPUT CURRENT IS 1A!
INPUT A AND B ARE INTERCONNECTED!
Technical #
- IN A connector – JST PH
- IN B connector – JST XH
- OUT A connector JST SH 3p (for the ENTIRE)
- OUT B connector JST SH 4p (for the Link via UNI cable)
- Dimensions (including connectors) – 25mm * 14mm * 7mm
- Maximum constant output current is 1A
- Burst current can be up to 3A (60seconds)
Safety #
- Shortcut protection
- Overheat protection
- Overload protection
- Output overvoltage protection
- NO REVERSE POLARITY PROTECTION
Usage #
- Connect power to IN A connector or IN B connector. You can use:
- Default cable (with tinned ends)
- optional Gremsy power cable
- optional P-TAP power cable
- In all official usage scenarios is IN A used as input
- IN B is used as forwarding port for SmartPlug powering, but can be also used as input in custom usage scenarios
- If 5V ouput is active, Green LED will light up
- Connect output via included power cable
- Follow polarity rules as per image ->
ENTIRE connection #
- Use included cable JST SH 3p to 2p for ENTIRE connection
