Entire configuration and connection #
1. Open the Entire’s menu, select “Control mode” and switch to “LAN”
2. Connect the LAN adaptor for VENICE by 6pin cable to PORTMULTI of the Entire
3. After few seconds the Entire will show “Dongle ready” status as sign of proper connection
4. Connect LAN cable to the adaptor RJ45 outlet
Camera configuration and connection #
1. Turn on the camera and open MENU
2. Open Technical > Authentication
3. Set User Name – “admin”
4. Set Password – “A1234567”
5. Open Network configuration
6. Set static IP (disable DHCP)
7. Configure IP address 192.168.10.50
8. Check if network is set to LAN mode
9. Connect LAN cable into the camera
10. Check the Entire’s overview page for camera connection
If all settings was done correctly, Entire will show “Camera box” highlighted as “online” 
Additional notice #
ND Filters of the camera are controlled by function “Exposure Corr.” of the Entire.
