Z-CAM camera control

Table of Contents
WiFi control #

WiFi control is available only on some Z-CAM cameras, because manufacturer decided to use 5GHz band only. Entire is able to work only in 2.4GHz WiFi band.

1)   Open the Entire’s MENU and configure control mode to “WiFi”
2)    Open WiFi connection and scan for the Z-Cam E2 network. Click to connect.
3)    Default WiFi password of the camera is 12345678
4)    Once connected, Entire’s STATUS LED will go green and you are ready to go.

USB control #

USB Control is available on all ZCAM cameras. Entire configuration may be confusing as needs LAN mode to be used, however this is because Entire uses virtual LAN connection in the USB connection.

1)    Open the Camera MENU and configure USB mode to “network”
2)    Open the Entire’s MENU and configure control mode to “LAN”
3)    Connect the camera by USB-C cable
4)    Once connected, Entire’s STATUS LED will go green and you are ready to go.

What are your Feelings
WiFi control

WiFi control is available only on some Z-CAM cameras, because manufacturer decided to use 5GHz band only. Entire is able to work only in 2.4GHz WiFi band.

1)   Open the Entire’s MENU and configure control mode to “WiFi”
2)    Open WiFi connection and scan for the Z-Cam E2 network. Click to connect.
3)    Default WiFi password of the camera is 12345678
4)    Once connected, Entire’s STATUS LED will go green and you are ready to go.

USB control

USB Control is available on all ZCAM cameras. Entire configuration may be confusing as needs LAN mode to be used, however this is because Entire uses virtual LAN connection in the USB connection.

1)    Open the Camera MENU and configure USB mode to “network”
2)    Open the Entire’s MENU and configure control mode to “LAN”
3)    Connect the camera by USB-C cable
4)    Once connected, Entire’s STATUS LED will go green and you are ready to go.