Table of Contents
TAG-E pinout description #
All GNDs are interconnected!
All input and output pins of 5V and Ground are interconnected.
Input power is interconnected to IO A/B/C, PPS, USB.
Make sure that external device can handle 5V input, or does not output higher voltage to TAG-E.
If you are not sure, contact us at info@airpixel.cz or disconnect the power pin by removing from cable connector.
Make sure that external device can handle 5V input, or does not output higher voltage to TAG-E.
If you are not sure, contact us at info@airpixel.cz or disconnect the power pin by removing from cable connector.
PWR
- 5V power input (peak up to 2Amps)
- GND
USB
- 5V output (internally disconnectable)
- CAPTURE
- Exposure detection input
- 3.3V logic
- 33k internal pull-up
- DNC – DO NOT CONNECT
- DNC – DO NOT CONNECT
- DNC – DO NOT CONNECT
- DNC – DO NOT CONNECT
- USB D+
- USB D-
- GND
PPS
- PPS input
- 3.3V logic
- Internal 33k pull-up
- DNC – DO NOT CONNECT
- GND
IO – A/B/C
- 5V output
- internally connected to PWR 1-pin via diode
- do not exceed current of 100mA
- do not connect this pin for devices with external power
- RX pin (Connect to TX pin of connected device)
- TX pin (Connect to RX pin of connected device)
- GND
