Serial API control

Table of Contents

Basic information #

AIR Commander Link Transmitter can be controlled via serial API. This may be handy for automated, long range, wireless control of the camera from PC / MAC via application or from Arduino.

Connection #

  • Connection must be wired up as per the image at right
  • Power input can be inserted to the second connector of the Link
  • Power input can be also inserted to the last undocumented pin (top) of the connector at right picture ->
  • Link has internal reverse polarity protection
  • Input power of 5V is suggested

Testing connection #

  • We have test VB application for remote control from PC
  • This app can be used for connection test or everyday use
  • Application is available as
  • Open application, select proper COM port and click CONNECT
  • If connection is proper, button will switch to “Connected” status
  • Press of any button in the app should lead to CONN LED blink at AIR Commander LINK

Protocol description #

  • Follow this link for API commands description
What are your Feelings

Basic information

AIR Commander Link Transmitter can be controlled via serial API. This may be handy for automated, long range, wireless control of the camera from PC / MAC via application or from Arduino.

Connection

  • Connection must be wired up as per the image at right
  • Power input can be inserted to the second connector of the Link
  • Power input can be also inserted to the last undocumented pin (top) of the connector at right picture ->
  • Link has internal reverse polarity protection
  • Input power of 5V is suggested

Testing connection

  • We have test VB application for remote control from PC
  • This app can be used for connection test or everyday use
  • Application is available as
  • Open application, select proper COM port and click CONNECT
  • If connection is proper, button will switch to “Connected” status
  • Press of any button in the app should lead to CONN LED blink at AIR Commander LINK

Protocol description

  • Follow this link for API commands description